Roof Bedding and Pointing Services

The time it takes to repoint a roof can vary depending on various factors, such as the size of the roof, the extent of the pointing work needed, and the weather conditions.

As a rough estimate, repointing a small to medium-sized roof can take anywhere from 1-3 days, while a larger or more complex full roof restoration may take several days or even weeks to complete.

Age: Over time, ridge capping may naturally deteriorate due to the effects of aging, such as exposure to the elements and UV rays from the sun.

Weather conditions: Extreme weather conditions, such as heavy rain, snow, and wind, can cause ridge capping to crack. Constant exposure to these elements can weaken the material and cause it to crack over time.

Poor installation of ridge caps above: Ridge capping that is not installed properly can lead to stress points that can cause cracking. This can occur if the capping is not secured properly, or if the wrong adhesive is used during installation.

Movement of the roof structure: If the entire roof structure moves or shifts due to settling or other factors, it can cause stress on the ridge capping, leading to cracking.

Thermal expansion and contraction: Changes in temperature can cause the ridge capping to expand and contract, which can lead to cracking if the material is not able to withstand the stress.

The lifespan of ridge capping can vary depending on various factors such as the materials used, the quality of installation, and the local weather conditions. Typically, well-installed and properly maintained ridge capping can last anywhere from 10 to 30 years.

The longevity of ridge capping also depends on the type of material used. For example, cement mortar ridge capping tends to last longer than plastic or metal ridge capping. However, cement mortar ridge capping can deteriorate more quickly in areas with high exposure to extreme weather conditions or acidic rain.

Fixing a ridge cap or capping involves repairing or replacing the material that covers the ridge of a roof. Ridge capping is typically made of cement mortar, metal, or plastic and serves as a protective cover for the intersection of two sloping roof surfaces.

Here are the steps to fix ridge capping:

1. Remove the old ridge capping material: This involves carefully removing the old ridge capping material, taking care not to damage the underlying roof structure.
2. Inspect the roof structure: Once the old ridge capping material has been removed, inspect the underlying roof structure for any signs of damage or deterioration that may need to be repaired.
3. Replace damaged roof tiles or slates: If any of the roof tiles or slates are damaged, they should be replaced before installing the new ridge capping.
4. Install the new ridge capping material: The new ridge capping material should be installed using cement mortar or another appropriate adhesive. The material should be secured in place and pressed firmly onto the roof surface to ensure a secure bond.
5. Point the new ridge capping: Once the new ridge capping material is installed, the gaps between the tiles or slates and the ridge capping should be filled with mortar or sealant to create a water-tight seal.

Roof bedding refers to the process of laying a bed of mortar on the roof structure in order to secure the roof tiles or slates in place. The bedding mortar acts as a base for the tiles or slates to rest on, providing a level and stable surface for them to be fixed onto.

The whole roof tile bedding process involves first cleaning the roof surface and removing any debris or old mortar. Then, a layer of mortar is applied to the roof surface, and the tiles or slates are laid onto the mortar while it is still wet. The tiles or slates are then pressed firmly into the mortar to ensure a secure bond.

The lifespan of roof pointing can vary depending on various factors such as the materials used, the quality of workmanship, and the local weather conditions. Typically, well-done roof pointing can last anywhere between 10 to 30 years. However, some types of pointing, such as those made with lime mortar, may have a shorter lifespan and may require more frequent maintenance.

Yes, it is possible to repoint over old pointing. Repointing involves removing the old mortar from between the bricks or stones and replacing it with new mortar. In some cases, the old mortar may need to be removed completely before new the mortar mix can be applied. However, in other cases, it may be possible to apply new mortar over the old pointing if it is in good condition and has not deteriorated too much. It is important to assess the condition of the old pointing and determine the appropriate method for repointing to ensure the longevity and stability of the structure.

Pointing on a roof refers to the process of applying a sealant or mortar to the gaps between the roof tiles or slates. This process is done to fill in any gaps or cracks that may have developed between the tiles or slates over time, which can lead to water leaks and damage to the underlying concrete tile roof structure.

Pointing is an essential aspect of roof maintenance and is typically carried out as part of a routine maintenance schedule or as needed when signs of damage or deterioration are observed. The type of pointing material used may vary depending on the specific roof type and the location of the building.